EKOBIOTENOL BET B/R
EKOBIOTENOL BET B/R is designed for lubrication and maintenance of all types of molds and formwork made ??of different materials such as, wood, PVC, steel. Usage for the production of the lightweight aggregate concrete elements.
Composed with highly refined base oil and a package of environmentally friendly adhesives, corrosion and prevents the formation of mist in the workplace.
It can be applied by spraying or by brush.
Causes no colors on the surface of the concrete.
Basic parameters of EKOBIOTENOL BET B/R:
- Flash point in open cup: above 800C,
- Pour point: below - 200C,
- Kinematic viscosity at 200C: less than 15 mm2 / s,
- Density at 200C: 0.80-0.90 g/cm3
Preparation parting doform is designed for lubrication and maintenance of all types of molds and formwork made of different materials such as, wood, PVC, steel.
Use of the product facilitates the stripping of concrete. The contact surface is perfectly smooth and the corners sharp. DOFORM does not change the color of concrete and has no negative impact on the subsequent processing of substrates such as plastering, painting, plaster. Regular use of the product doform extends up to 5 times the life of molds and formwork panels.
How to use
DOFORM can be applied to surfaces of the shuttering form or by any method so as to obtain a thin layer of uniformly distributed over the entire surface in contact with the concrete.
Can not unambiguously determine the consumption of the product, its performance is dependent on the method of application, the film thickness, the substrate and the degree of wear.
Packaging, storage, safety
DOFORM available in packs of 10 and 200 l.
Store in tightly closed containers in a temperature of 5-25 ° C.
Durability 2 years from the date of manufacture on the packaging.
Delamination is not a fault.
Shake well before use and mix lightly.
DOFORM has PZH Safety phrases:
S 2 - Keep out of reach of children
S 24/25 - Avoid contact with eyes and skin
S 26 - contact with eyes, rinse immediately with plenty of water and seek medical advice
S 29 - not empty into drains
S 46 - If swallowed, seek medical advice immediately - show the label
EKOBIOTENOL BET B/R
Fluid Noformix for molding usage is water mixture with paraffin wax with addition of substance counteracting adherence of concrete to moulds. Advantage of this fluid is good surface covering of the moulds, and low wear to cover the moulds.
Application: Noformix is used to lubricate metal moulds, steel moulds, wood moulds, ceramic moulds, concrete plastic moulds and silicone – resin moulds in production of concrete elements. Counteracts of adhering the concrete to mould surface, and this makes it easy to achive the separation of ready concrete product from the mould, and maintain smooth surface of ready product.
Usage: Base: steel, ceramic, plastic, silicone – resin and wooden. In case of using wooden moulds, the fluid should be used two times: first time, 2 hours before using the mould, and the second time directly before mould usage. Next mould usage requires just one covering of this fluid. Overlay methods : NOFORMIX can be layed by a paintbrush, paint roller, by pneumatic spraying method or by hydrodynamic spraying. There is also a possibility to lay this fluid by dipping.
Performance: Cannot unambiguously determine the consumption of the product, its performance is dependent on the method of application, the film thickness, the substrate and the degree of wear.
|Copyright © PHU Marcin Kowalewski||Created by MediaSoft|